Scantool Diagnostics

Scantool Data Analysis

Check DTC
1. Connect GDS.
2. IG "ON" and engine "OFF".
3. Select "DTC Analysis" mode.
4. After erase DTC, keep the vehicle condition within "the enable conditions" .




5. Is the same DTC occurred again?





Check Front Wiper / Washer SW
1. Connect GDS.
2. IG "ON" & ENG "OFF".
3. Select "Current Data" mode.
4. Check Operating Status of Front Wiper / Washer parameter.

Specification : ON or OFF





5. Are all front wiper / washer SW parameter normal ?