Component Inspection

Component Inspection

Check mirror motor
1. Connect scantool
2. IG "ON" & ENG "OFF"
3. Execute "RH Outside Mirror (LEFT, RIGHT)" test.
4. Disconnect CAN communication units one by one and monitor DTC to find the cause.

Specification : Turned to pressed direction





5. Is motor working normal ?





Check switch
1. IG "ON" & ENG "OFF"
2. After connect GDS, select "Current Date" menu.
3. Check whether "Assist Mirror Switch-Right" is turned to "Right or Left" when the control switch is pressed. (RIGHT, LEFT)

Specification : Service data is switched. (Right <-> Left)





4. Is the service data normal?