Scantool Diagnostics
Scantool Data Analysis
1. Connect GDS.
2. IG "ON" and engine "OFF".
3. Select "DTC Analysis" mode.
4. After erase DTC, keep the vehicle condition within "the enable conditions" .
5. Is the same DTC occurred again?
Check defog in Assist rear view mirror
1. Connect GDS
2. IG "ON" & ENG "OFF"
3. Select "Actuation Test" mode.
4. Execute "Assist rear view mirror" test
Specification : ON or OFF
5. Is the Defog in Assist rear view Mirror normal ?