Component Inspection

Component Inspection

Rear Height Motor Check
1. Connect scantool
2. IG "ON" & ENG "OFF"
3. Select "Actuation Test" mode.
4. Execute "Rear Power Seat (UP, DOWN)" test.

Specification : Turned to pressed direction





5. Is motor working normal ?





Check switch
1. IG "ON" & ENG "OFF"
2. After connect GDS, select "Current Date" menu.
3. Check whether "Seat Rear Side Switch" is turned to "ON" when the control switch is pressed. (UP, DOWN)

Specification : Service data is switched. (ON <-> OFF)





4. Is the service data normal?