Scantool Diagnostics

Scantool Data Analysis

1. Connect GDS.
2. IG "ON" and engine "OFF".
3. Select "DTC Analysis" mode.
4. After erase DTC, keep the vehicle condition within "the enable conditions" .




5. Is the same DTC occurred again?





Scantool Data Inspection
1. IG "OFF" and Connect GDS.
2. IG "ON" & ENG "OFF"
3. Select "Current Data" mode.
4. Monitor the "Rear Windshield Defog State" parameter on the scantool.




5. Is the service data normal?