Scantool Diagnostics

Monitor Scantool data

Check Actuation Test
1. Connect diagnostic tool to the DLC.
2. Warm up the engine to normal temperature after engine start
3. Select "Air Mix Door Potentiometer-Passenger" parameter on the current data with scantool
4. Perform Actuation Test for "Passenger Air Mix Door - 0% / 50% / 100%.
5. During the actuation test, verify the position sensor data.

Specification : Check that the value of Air Mix Door Potentiometer at current data should be close to the value of the actuation test.





6. Does the value of current data follow in accordance with the each actuation test ?