Inspection/Repair - W/Harness Inspection

Terminal and Connector Inspection

1. Many malfunctions in the electrical system are caused by poor harness(es) and terminals. Faults can also be caused by interference from other electrical systems, and mechanical or chemical damage.
2. Thoroughly check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage.
3. Has a problem been found?






Left Headlamp High Circuit Inspection

Check open in harness
1. IG "OFF", disconnect battery (-) terminal.
2. Disconnect FAM connector.
3. Measure resistance between the Left Headlamp High terminal of FAM harness connector and ground of the Left Headlamp High.

Specification : Approx. 1 Ohm





4. Is the measured resistance within specification?