Component Inspection
Component Inspection
1. Ignition "ON" & Engine "OFF".
2. Disconnect "ATM Control Unit (CLG01-C)" connector.
3. Connect scantool and select 'Simulation Function"on the scanner.
4. Simulate duty pulse on signal terminal of "Input Speed Sensor 1 & 2" with scanner.
Fig 1) Turbine Speed Sensor 2 : 150 Hz -> 227 rpm
Fig 2) Turbine Speed Sensor 2 : 340 Hz -> 5160 rpm
Fig 3) Turbine Speed Sensor 1 : 150 Hz -> 79 rpm
Fig 4) Turbine Speed Sensor 1 : 340 Hz -> 179 rpm
** The values are subject to change according to vehicle model or conditions
5. Is "Input Speed Sensor 1 & 2" signal value changed according to simulation frequency?