Scantool Diagnostics

Monitor Scantool Data

1. Connect scantool to data link connector (DLC)
2. Engine "ON".
3. Select "D RANGE" and drive vehicle from 1st gear to 5th gear.
4. Monitor the "TORQUE CONVERTER (DAMPER) CLUTCH" parameter on the scantool.

Specification : TCC SLIP < 40 rpm+ Vsp1/2 (TCCSV Current > 6.5A)





















Fig 1) 1st gear in "D" range - No Torque Converter Clutch operation
Fig 2) 2nd gear in "D" range - No Torque Converter Clutch operation
Fig 3) 3rd gear in "D" range - No Torque Converter Clutch operation
Fig 4) 4th gear in "D" range - No Torque Converter Clutch operation
Fig 5) 5th gear in "D" range - Torque Converter Clutch operation
5. Is the measured "TCC SLIP (DAMPER CLUTCH SL. rpm)" within specifications ?