Component Inspection

Component Inspection

1. Check transponder and ECU status
(1) IGN "ON" & Engine "OFF" with key intended to register
(2) Monitor the ""ECM,KEY and Smartra STATUS' Parameter on the Scantool.

Specification : 'LEARNT'





Fig 1) This data show that 3 keys have been taught, ECU has been learn, Key in key cylinder has been learn and SMARTRA3 has been learn.
(3) Are "KEY STATUS", "SMARTRA STATUS" and "ECU STATUS' Parameter within specifications?





2. Check transponder
(1) IGN "ON" & Engine "OFF"
(2) Neutralize ECM and Register transponder key by scantool.

NOTE:
Pin code is required to Neutralize ECM and to Register transponder key

(3) Are Neutralizing and Registering completed normally ?