Repair Procedures

Removal

1. Disconnect the negative (-) battery terminal.
2. Remove the center fascia side garnish(A).




3. Remove the center air vent(A) after loosening the screws.




4. Disconnect the hazard lamp connector.

NOTE:
- Be careful not to damage the connector when disconnecting the connector.




5. Remove the mounting screws then remove the audio head unit (A).




6. Disconnect the connectors and antenna cable.

Installation

1. Reconnect the audio connector and antenna cable.
2. Install the audio head unit.
3. Reconnect the hazard lamp connector
4. Install the center air bent panel.
5. Install the center fascia side garnish.

NOTE:
- Make sure the audio head unit connectors are plugged in properly, and the antenna cable is connected properly.

6. Check the audio system.