Front Seat

Seat Back Cover Replacement
1. Remove front seat assembly.
2. Remove the headrest.
3. Remove the lumber support level (A).




4. After disconnecting the scuff band, remove the seat back panel (A).




5. Disconnect the protector (A) from the back frame.




6. Disconnect the connector (A).




7. Pull out the headrest guides (A) while pinching the end of the guides, and remove them.




8. After removing the hogring clip on the front of seat back and remove the seat back cover (A).




9. Installation is the reverse of removal.

NOTE:
- Use Hi-Scan tool to re-zero PODS system after replacing component. (Passenger's)