Recall - Brake Pedal Mount Replacement
NUMBER 096GROUP Safety Recall Campaign
DATE June 2012
MODEL Borrego (HM) 2009MY
VOLUNTARY SAFETY RECALL CAMPAIGN
SUBJECT:
BRAKE PEDAL MOUNT REPLACEMENT (SC096)
This bulletin provides information relating to certain Borrego vehicles built from May 02, 2008 to January 20, 2009. The high strength plastic mount for the brake pedal is designed to break off in certain collisions to help protect the drivers leg from injury when the brake is applied during impact. Certain pedal mounts may have a fiberglass composition that allows them to break off in a collision where the impact has not immobilized the vehicle which could then roll. The driver would then be required to stop the vehicle with the parking brake or experience a possible second impact, which could result in personal injury. To correct this issue, follow the repair procedure below to replace the brake pedal mount.
NOTICE
There is no charge to the vehicle owner for this repair. Under applicable law, you may not sell or otherwise deliver any affected Borrego until it has been repaired pursuant to the procedures set forth in this bulletin.
NOTICE
To improve customer satisfaction, always remember to refer to WebDCS Warranty Coverage (validation) Inquiry Screen (Service> Warranty Coverage> Warranty Coverage Inquiry) for a list of any additional campaigns or service actions that may need to be performed on the vehicle before returning it to the customer.
Brake Pedal Assembly Service Procedure
AFFECTED VEHICLE PRODUCTION RANGE
AFFECTED VEHICLE PRODUCTION RANGE
WARRANTY CLAIM INFORMATION