Initial Inspection and Diagnostic Overview

Service Adjustment Procedure

Fluid level inspection
1. Clean the fluid level plug and the surface near.
2. Remove the fluid level plug (A).

NOTE:
When the oil is warm, check or drain the oil.




3. Check that the fluid flows out of the fluid level hole. If not, add fluid as required.
4. When the fluid dribbles out of the fluid level hole, install the fluid level plug.

Tightening torque:
20 - 30 Nm(2.0 - 3.0 kgf.m, 14.5 - 21.7 lb-ft)