General Information
Component Location
General Description
The intake actuator, mounted at the heater unit,controls the air intake source. The intake actuator consists of a motor and a feedback potentiometer. When driver operates the intake switch, ECU receives mode signal from intake switch and operates intake door motor to turn intake door to intended position. (with FRE mode signal, intake door is closed and with REC mode signal, intake door is opened)
In operation, potentiometer delivers intake door position transformed into voltage value to A/C ECU.
DTC Description
B2408 will set if the intake actuator has not responded to an A/C ECU actuation signal for over 40 seconds.
DTC Detecting Condition
Specification
** Voltage value of Intake potentiometer as a function of position of Intake door
Diagnostic Circuit Diagram