Operation CHARM: Car repair manuals for everyone.

General Information





Component Location





General Description

TCM inputted this signal through CAN communication line so TCM recognize driver's intension to control shift point.
TCM realized optimum shift point use this signal.

DTC Description

TCM set this code If detected not available TPS signal in condition that CAN signal is normal.

DTC Detecting Condition





CAUTION:
1. The function with the higher priority will always take precedence. However, a low-priority is not overruled by a higher priority function.
2. Functions from different priority categories can also run in parallel. It is important to note which function will take precedence in this case.
3. In such an event it is possible for a substitute function with low priority not be carried out if a second, higher-priority function is present. This has been taken into account when compiling the priority list and is international.
4. The mechanical emergency run function must always have the highest priority, since from the electrical standpoint it is the only safe condition.


Signal Waveform & Data








Fig 1) APS closed (IG ON)
Fig 2) APS wide-open (IG ON)