Operation CHARM: Car repair manuals for everyone.

General Information





Component Location





General Description

This data input goes through CAN communication line and TCM is able to request for "Shift Inhibit and torque reduction" on the basis of this signal.

DTC Description

TCM set this code If not match Engine torque signal with TCM torque signal. (MIL ON : 2 driving Cycle)

DTC Detection Condition





CAUTION:
1. The function with the higher priority will airways take precedence. However, a low-priority is not overruled by a higher priority function.
2. Functions from different priority categories can also run in parallel. It is important to note which function will take precedence in this case.
3. In such an event it is possible for a substitute function with low priority not be carried out if a second, higher-priority function is present. This has been taken into account when compiling the priority list and is international.
4. The mechanical emergency run function must always have the highest priority, since from the electrical standpoint it is the only safe condition.


Diagnostic Circuit Diagram