Component Inspection

Component Inspection

Check rear defogger
1. Connect scantool to Data Link Connector (DLC).
2. Ignition "ON" & engine "OFF"
3. Check if DTC is erased after replacing defogger with "defogger for test".
4. Is the DTC erased?
YES
1) Replace "defogger for test" with "new defogger" and go to "Verification of Vehicle Repair".
NO
1) Go to "Check RAM".
Check RAM
1. Connect scantool to Data Link Connector (DLC).
2. Ignition "ON" & engine "OFF"
3. Check if DTC is erased after replacing RAM with "RAM for test".
4. Is the DTC erased?
YES
1) Replace "RAM for test" with "new RAM" and go to "Verification of Vehicle Repair".
NO
1) Check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage. Repair or replace if necessary and then go to "Verification of Vehicle Repair" procedure.