Component Inspection

Component Inspection

1. Check door clutch
1. Ignition "ON" & engine "OFF"
2. Disconnect door clutch
3. Connect (+) terminal of battery to terminal 2 of door clutch and (-) terminal to terminal 2 of door clutch




4. Dose the door clutch work properly?
YES
1) Check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage. Repair or replace as necessary and then go to "Verification of Vehicle Repair" procedure.
NO
1) Substitute with a known-good drive unit and check for proper operation.
If the problem is corrected, replace drive unit and then go to "Verification of Vehicle Repair" procedure.

CAUTION:
** It is impossible to change door clutch separately. So it is changed by drive unit when change is necessary.