Component Inspection

Component Inspection

1. Check latch switch
1. Ignition "ON" & engine "OFF"
2. Disconnect latch switch
3. Connect (+) terminal of battery to terminal 3 of latch switch and (-) terminal to terminal 6 of latch switch.
4. Connect (+) terminal of battery to terminal 6 of latch switch and (-) terminal to terminal 3 of latch switch.




5. Dose the latch motor work properly?
YES
1) Check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage. Repair or replace as necessary and then go to "Verification of Vehicle Repair" procedure.
NO
1) Substitute with a known-good latch switch and check for proper operation.
If the problem is corrected, replace latch switch and then go to "Verification of Vehicle Repair" procedure.