General Information

Component Location





General Description

Power sliding door (hereinafter PSD) is the system which moves sliding door of vehicle by electronic motor so that user can open or close door with less force than required on manual operation. PSD consists of drive unit, center roller/rail, handle and various kinds of switch (anti pinch, detent, latch), latch switch controls lock/unlock of door When power door open signal is received, PSD ECU unlatch the switch and starts operation. On the contrary, When power door close signal is received, PSD ECU close the door until latch and striker is in primary full latch position.

DTC Description

The ECM sets DTC B2450 if there's short to battery in unlatch motor power harness.

DTC Detecting Condition





Schematic Diagram