Seat Cushion Cover Replacement

REPLACEMENT

SEAT CUSHION COVER REPLACEMENT
1. Remove front seat assembly.
2. Remove the recliner cover.
3. Disconnect the scuff band.
4. Disconnect the connector (A), (B).




5. Loosen the mounting bolts, then remove the seat back assembly (A).




6. Loosen the mounting bolts, then remove the seat leg assembly (A).




7. Disconnect the protector (A) from the cushion frame, then remove the hog-ring clips (B).




8. Disconnect the seat cushion pad (B) from the track (A).




9. After removing the hog-ring clips (A) on the front of seat cushion remove the seat cushion cover (B).




10. Installation is the reverse of removal.
a. To prevent wrinkles, make sure the material is stretched evenly over the cover (A) before securing the hog-ring clips (B).
b. Replace the hog-ring clips with new ones using special tool (C).