General Information

Component Location





General Description

The OUTPUT SPEED SENSOR outputs waveform signals according to the revolutions of the output shaft of the transmission. The Output Speed Sensor is installed in front of the Parking Gear to determine the Parking Gear rpms by counting the frequency of the pulses. This value, together with the throttle position data, is mainly used to decide the optimum gear position.

DTC Description

The TCM sets this code if the noticeable difference between calculated value from Output speed sensor and calculated value from Vehicle speed sensor, when the vehicle is running faster than 18.6 MPH (30 km/h). The TCM will initiate the fail safe function if this code is detected.

DTC Detecting Condition





Specification





Schematic Diagram





Signal Waveform