Component Inspection

Component Inspection

1. Connect Scantool
2. Engine "ON".
3. Monitor the "OIL PRESSURE. S/W 1, 2, 3, 5, 6" parameter on the scantool
4. Move select lever to "D" range and operate vehicle within 1st gear condition.








5. Does "OIL PRESSURE. S/W 1, 2, 3, 5, 6" follow the reference data?
YES
1) Repair AUTO TRANSAXLE (Clutch or Brake) as necessary and Go to "verification of vehicle repair" procedure.
NO
1) Replace AUTO TRANSAXLE (BODY CONTROL VALVE faulty) as necessary and Go to "verification of vehicle repair" procedure.