Component Inspection

Component Inspection

Check Torque Converter Clutch Solenoid Valve
1. Disconnect "C106-2" connector.
2. Ignition "OFF".
3. Measure resistance between terminal "9" of the C106-2 harness connector and chassis ground.
A. Specification : approx. 3-9 Ohms




4. Is resistance within specifications?
YES
1) Repair TORQUE CONVERTER CLUTCH (REPLACE Torque Converter) as necessary and Go to "verification of vehicle repair" procedure.
NO
1) Replace A/T ass'y (possible to BODY CONTROL VALVE faulty) as necessary and Go to "verification of vehicle repair" procedure.