General Information

Component Location





General Description

Low coast brake solenoid valve is turned "ON" or "OFF" by the TCM in response to signals sent from the inhibitor switch, vehicle speed sensor and accelerator pedal position sensor (throttle position sensor). Gears will then be shifted to the optimum position.

DTC Description

The PCM/TCM checks the Shift Control Solenoid Valve A control signal by monitoring the feedback signal from the solenoid valve drive circuit. If an unexpected signal is monitored, (For example, high voltage is detected when low voltage is expected or low voltage is detected when high voltage is expected) the PCM/TCM judges that Shift Solenoid "E (LC/B Solenoid)" circuit is malfunctioning and sets this code.

DTC Detecting Condition





Schematic Diagram