Component Inspection

Component Inspection

Check OCV resistance
1. IG "OFF" and disconnect OCV connector.
2. Measure resistance between power and control terminals of OCV. (Component Side)

Specification : 6.7 - 7.7 Ohms





3. Is the measured resistance within specification?





Check CAM PHASER with actuation test
1. Connect scantool and IG "ON"
2. Select "OIL CONTROL VALVE" on the Actuation Test
3. Activates "CAM PHASER INTAKE BANK 1" by pressing "START" button
4. Repeat this procedure 4 or 5 times to ensure CAM PHASER and valve control solenoid reliability








5. Has a problem been found ?