Scantool Diagnostics

Monitor Scantool Data

1. Connect scan tool to data link connector (DLC), Ignition "ON"
2. Erase DTC and Engine "ON"
3. Monitor the "ON/OFF solenoid valve (SOL 7)" parameter on the scan tool.
4. Select "D" range and Drive vehicle, confirm output data of solenoid valve.

Specification : 1st, 2nd, 3rd gear : OFF 4th, 5th 6th gear : ON


Solenoid valve operating status according to gear position





-O- : variable control




Fig 1) ON/OFF Solenoid valve - 4th, 5th, 6th gear
5. Dose "ON/OFF solenoid valve (SOL 7)" operated normally ?