Scantool Diagnostics

Monitor Scantool Data

1. Connect scan tool to data link connector (DLC), Ignition "ON"
2. Erase DTC and Engine "ON"
3. Monitor the "Shift control solenoid valve2 & Shift control solenoid valve3" parameter on the scan tool.
4. Select "D" range and Drive vehicle, confirm output data of solenoid valve.

Specification : 48mA ~ 848 mA


Solenoid valve operating status according to gear position





-O- : variable control








Fig 1) 5th-6th gear shifting : Shift control solenoid valve2
Fig 2) 6th-5th gear shifting : Shift control solenoid valve3
5. Dose "Shift control solenoid valve2 & Shift control solenoid valve3" operated normally ?