General Information

Component Location





General Description

The shift motor is controlled by the TCCM as needed for 4H, 4L, and AUTO operation. The shift motor uses a 4-switch Position Encoder that provides motor position data to the TCCM.
Position Encoder is installed on shift motor and consists of 4 switches. Whenever switching Mode switch, shift motor is operating, making that position encoder point changes ON and OFF. Finally, with this ON and OFF signal goes to TCCM, TCCM check shift motor operation.

DTC Description

TCCM sets DTC P1736 if TCCM detects shift motor control circuit is open or short to battery.

DTC Detecting Condition





Diagnostic Circuit Diagram