Component Inspection

C1513 Brake Switch Error

Inspection/Repair - Component Inspection

Component Inspection

Brake light switch Check
1. Ignition "OFF" & Engine "OFF".
2. Disconnect the brake light switch connector.
3. Measure resistance between power terminal and signal terminal of the brake light switch A, B connector.

Specification : Resistance between terminals of the brake light switch A - Infinity Ohms (when the plunger is pushed down), 0 Ohms (when the plunger isn't pushed down).
Resistance between the terminals of the brake light switch B - Infinity Ohms (when the plunger is not pushed down), 0 Ohms (when the plunger is pushed down).




4. Is the measured value within specifications?