Scantool Diagnostics

C2316 Front-RH Valve error (Inlet Valve)

Scantool Diagnostics - Monitor Actuation Test

Monitor Actuation Test

1. Connect scantool to Data Link Connector (DLC)
2. Ignition "ON" & Engine "OFF".
3. Select the "Actuation Test" mode on the scantool.
4. Inspect operating status of Front right valve (in) with Actuation Test.

Specification : It's normal if operating sound is heard.




Fig.1) Test Condition : Ignition "ON" & Engine "OFF".
Ex) Actuation Test on Front right valve (in)
5. Does a Front right valve (in) operate normally?