Scantool Diagnostics

C2328 Rear-LH Valve error (Outlet Valve)

Scantool Diagnostics - Monitor Actuation Test

Monitor Actuation Test

1. Connect scantool to Data Link Connector (DLC)
2. Ignition "ON" & Engine "OFF".
3. Select the "Actuation Test" mode on the scantool.
4. Inspect operating status of Rear left valve (out) with Actuation Test.

Specification : It's normal if operating sound is heard.




Fig.1) Test Condition : Ignition "ON" & Engine "OFF".
Ex) Actuation Test on Rear left valve (out)
5. Does a Rear left valve (out) operate normally?