Exterior Moulding / Trim: Service and Repair

REPLACEMENT

ROOF RACK REPLACEMENT

NOTE:
- When prying with a flat-tipped screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
- Put on gloves to protect your hands.
- Take care not to scratch the body surface.

1. Remove the roof rack cover (A).
2. Remove the roof rack (B), by removing nut protector covers, and removing the nuts.
3. Installation is the reverse of removal.





FRONT MUD GUARD AND WHEEL GUARD REPLACEMENT

NOTE:
- When prying with a flat-tipped screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
- Put on gloves to protect your hands.
- Take care not to scratch the body surface.

1. Remove the wheel guard (B) first by removing the clip and screw, then remove the wheel guard(A), by removing the screws and clip.




2. Installation is the reverse of removal.

REAR MUD GUARD AND WHEEL GUARD REPLACEMENT

NOTE:
- When prying with a flat-tipped screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
- Put on gloves to protect your hands.
- Take care not to scratch the body surface.

1. Remove the wheel guard (B) first by removing the clip and screw, then remove the wheel guard(A), by removing the screws and clip.




2. Installation is the reverse of removal.

SIDE GARNISH AND SIDE SILL REPLACEMENT

NOTE:
- When prying with a flat-tipper screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
- Put on gloves to protect your hands.
- Take care not to scratch the body surface.

1. Remove all the screw and clips to replace the side garnish and side sill.