Repair Procedures

REPLACEMENT

SECONDARY SEAT

REMOVAL
1. Slide the seat to the rearward.
2. Back seat folding.




3. Remove the seat assembly (B) after pressing the lever(A).





INSTALLATION
1. Back seat folding.




2. Slide the seat to the rearward.




3. Lift the back side of the seat.




4. Arrange the seat to the rear side of the strike by using the roller.




5. Turn the seat to the forward at an angle of about 81 degrees for locking between the plate and striker.




6. Turn the seat to the rearward for locking between the rear latch and striker.




7. Unfold the back of the seat.




8. The leg cover hole color must be discolored to green.





RECLINER COVER REPLACEMENT
1. Remove the recliner lever(B) and cover (A).




2. Loosen the mounting bolts, then remove the seat back assembly (A).
3. Disconnect the auto tumble cable(B).





SEAT BACK COVER REPLACEMENT
1. Remove the recliner cover.
2. Remove the cover (A).
3. After the armrest mounting bolt, then remove the armrest (B).




4. Remove the seat back panel (A).




5. Remove the hog-ring clips (A).




6. Remove the headrest and headrest guide.
7. After removing the hog-ring clips (A) on the front of seat back remove the seat back cover (B).




8. Installation is the reverse of removal.

NOTE:
- To prevent wrinkles, make sure the material is stretched evenly over the cover (B) before securing the hog-ring clips (A)
- Replace the hog-ring clips with new ones using special tool (C).





SEAT CUSHION COVER REPLACEMENT
1. Remove the seat assembly.
2. Remove the recliner cover.
3. Loosen the mounting bolts, then remove the seat back assembly (A).




4. Loosen the mounting bolts, then remove the seat cushion (A).




5. Remove the recliner cable (A).




6. Loosen the mounting screw (A), then disconnect the scuff band (B).




7. Disconnect the protector (A) from the cushion frame, then remove the hog-ring clips (B).




8. Remove the frame (A).




9. After removing the hog-ring clips (A) on the front of seat back remove the back cover (B).




10. Installation is the reverse of removal.

NOTE:
- To prevent wrinkles, make sure the material is stretched evenly over the cover (B) before securing the hog-ring clips (A).
- Replace the hog-ring clips with new ones using special tool (C).





THIRD SEAT

SEAT ASSEMBLY REPLACEMENT
1. Remove the cover (A).




2. Loosen the mounting bolt.




3. Remove the seat assembly (A).




4. Installation is the reverse of removal.

RECLINER COVER REPLACEMENT
1. Remove the recliner cover (A).








2. Installation is the reverse of removal.

SEAT BACK COVER REPLACEMENT
1. Remove the recliner cable (A).




2. Loosen the mounting bolts, then remove the seat back assembly (A).




3. Remove the back panel (A).




4. Remove the hog-ring clips (A).




5. Remove the headrest guide (A).




6. Remove the frame (A).




7. After removing the hog-ring clips (A) on the front of seat back remove the seat back cover (B).




8. Installation is the reverse of removal.

SEAT CUSHION COVER REPLACEMENT
1. Remove the seat assembly.
2. Remove the recliner cover.
3. Loosen the mounting bolts, then remove the seat back assembly (A).




4. Disconnect the protector (A) from the back frame.




5. Disconnect the seat pad (B) from the back frame (A).




6. After removing the hog-ring clips (A) on the front of seat back remove the seat back cover (B).




7. Installation is the reverse of removal.

SEAT FRAME ASSEMBLY REPLACEMENT
1. Remove the cushion cover(A).




2. Installation is the reverse of removal.

SEAT BACK FRAM REPLACEMENT
1. Remove seat back cover(A).




2. Installation is the reverse of removal.