Repair Procedures

INSPECTION

1. There should be continuity between the NO.1 in the A and NO.10 in the B terminals when power and ground are connected to the NO.7 and NO.13 in the A terminals. (Passenger compartment relay box)
2. There should be to no continuity between the NO.1 in the A and NO.10 in the B terminals when power is disconnected.





REAR BLOWER
1. There should be continuity between the NO.4in the A and NO.12n the B terminals when power and ground are connected to the NO.2and NO.14in the A terminals. (Passenger compartment relay box)
2. There should be to no continuity between the NO.4in the A and NO.12in the B terminals when power is disconnected.






REPLACEMENT

1. Disconnect the negative (-) battery terminal.
2. Remove the crash pad center lower side cover.
3. Loosen the relate box mounting nut, and then remove the relay box(A).




4. Install in the reverse order of removal.