Repair Procedures

REPLACEMENT

1. Disconnect the negative(-) battery terminal.
2. Recover the refrigerant with a recover/ recycling/ charging station.
3. When the engine is cool, drain the engine coolant from the radiator.
4. Remove luggage side trim .
5. Remove the rear speaker.
6. Loosen the air duct mounting screw, and then remove the rear air duct(A).




7. Loosen the refrigerant line mounting bolts, and then remove the rear refrigerant line(A).




8. Remove the heater hose(A), drain hose(B).




9. Remove the rear heater main connector(A).




10. Loosen the rear heater mounting nuts, and then remove the rear heater unit(A).




11. Remove the rear temp actuator.
12. Remove the rear temp actuator lever(A).




13. Remove the heater core.
14. Installation is the reverse order of removal.