Power Door Lock Switch: Service and Repair

REPLACEMENT

DDM/ADM
1. Disconnect the negative battery terminal.
2. Remove the front door trim panel.
3. Remove the door module (A) mounting screws (5EA) after disconnecting the connector (3EA) from the actuator.




4. Remove the front door modules (DDMDM) from the front door trim panel.






INSPECTION

1. The DDM inputs can be checked using the scan tool.
2. To check the Input Value of door lock switch, select option "09. BODY CONTROL MODULE".




3. Select option "04. DRIVER DOOR MODULE".




4. Select option "02. CURRENT DATA".








5. To check the Input Value of door lock switch in force mode, select option "05. ACTUATION TEST".