Crankshaft Main Bearing

Main bearing

Install and uniformly tighten the bearing cap bolts, in several passes, in the sequence shown.

Tightening torque

Main bearing cap bolt:
49.0N.m (5.0 kgf.m, 36.2lb-ft) + 90° (1 - 8)
19.6N.m (2.0 kgf.m, 14.5lb-ft) + 120° (9 - 16)
29.4 - 31.4N.m (3.0 - 3.2 kgf.m, 21.7 - 23.1 lb-ft) (17 - 24)

NOTE:
- Always use new main bearing cap bolts.
- If any of the bearing cap bolts are broken or deformed, replace it.






Crankshaft







Place Of Identification Mark (Crankshaft Bearing)




Discrimination Of Crankshaft Bearing





Selection