Monitor Scantool Data

C1112 Sensor source voltage

Scantool Diagnostics - Monitor Scantool Data

Monitor Scantool Data

1. Connect scantool to Data Link Connector (DLC).
2. Ignition "ON" & Engine "ON".
3. Monitor the "BATTERY VOLTAGE, 5 VOLT REFERENCE" parameter on the scantool.

Specification : BATTERY VOLTAGE (Approx. 10 V ~ 16 V) 5 VOLT REFERENCE (Approx. 5 V)




Fig 1) Test Condition : Ignition "ON" & Engine "ON".
Normal Data
4. Is parameter displayed within specifications?