Exterior Moulding / Trim: Service and Repair

Replacement

Roof Rack Replacement

NOTE:
- When prying with a flat-tipped screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damaged.
- Put on gloves to protect your hands.
- Take care not to scratch the body surface.

1. Using a screwdriver or remover, remove the roof rack cover (A).
2. After loosening the mounting nuts, then remove the roof rack (B).




3. Installation is the reverse of removal.

Roof Molding Replacement
1. Using a screwdriver or remover, remove the roof molding (A).




2. Installation is the reverse of removal.

Front Wheel Guard And Mud Guard Replacement

NOTE:
- When prying with a flat-tipped screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damaged.
- Put on gloves to protect your hands.
- Take care not to scratch the body surface.

1. Remove the front tire.
2. After loosening the mounting clips and screws, then remove the front wheel guard (A), mud guard (B).




3. Installation is the reverse of removal.

Rear Wheel Guard And Mud Guard Replacement

NOTE:
- When prying with a flat-tipped screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damaged.
- Put on gloves to protect your hands.
- Take care not to scratch the body surface.

1. Remove the rear tire.
2. After loosening the mounting clips and screws,then remove the front wheel guard (A) and mud guard (B)




3. Installation is the reverse of removal.

Tailgate Garnish Replacement

NOTE:
- When prying with a flat-tipped screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damaged.
- Put on gloves to protect your hands.
- Take care not to scratch the body surface.

1. Remove the tailgate trim.
2. Loosen the mounting nuts, then remove the tailgate garnish (A).




3. Installation is the reverse of removal.

NOTE:
- Replace any damage clips.

Door Garnish Replacement

NOTE:
- When prying with a flat-tipped screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damaged.
- Put on gloves to protect your hands.
- Take care not to scratch the body surface

1. Using a screwdriver or remover, remove the front door garnish (A).
2. After loosening the mounting nut, remove the rear door garnish (B).




3. Installation is the reverse of removal.

NOTE:
- Replace any damage clips.

Fender Garnish Replacement

NOTE:
- When prying with a flat-tipped screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damaged.
- Put on gloves to protect your hands.
- Take care not to scratch the body surface.

1. Using a screwdriver or remover, remove the fender garnish (A).




2. Installation is the reverse of removal.

NOTE:
- Replace any damage clips.

Quarter Garnish Replacement

NOTE:
- When prying with a flat-tipped screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damaged.
- Put on gloves to protect your hands.
- Take care not to scratch the body surface

1. Using a screwdriver or remover, remove the quarter garnish (A).




2. Installation is the reverse of removal.

NOTE:
- Replace any damage clips

Rear Spoiler Replacement
1. Remove the cap (A) and nuts, then remove the rear spoiler (B).




2. Installation is the reverse of removal.

NOTE:
- Install the rear spoiler in numerical order.
(1 -> 2 -> 3 -> 4 -> 5)

Side sill garnish replacement

NOTE:
- When prying with a flat-tipped screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damaged.
- Put on gloves to protect your hands.
- Take care not to scratch the body surface

1. Using a screwdriver or remover, remove the side sill garnish (A).
2. Installation is the reverse of removal.

NOTE:
- Replace any damage clips