Repair Procedures

Replacement

Door Trim Replacement

NOTE:
- When prying with a flat-tipped screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
- Put on gloves to protect your hands.

1. Using a screwdriver or remover, remove the delta cover (A).




2. Using a screwdriver, remove the door inside handle cap (B).
3. Loosen the mounting screws, and then remove the door trim (A).




4. Push the hook (B), disconnect the inside handle cable cage (A).




5. Push the lock pin (A), disconnect the power window connector (B).
6. Remove the door trim




7. Installation is the reverse of removal.

NOTE:
- Make sure connectors are connected properly and each rod is connected securely.
- Make sure the door locks/unlocks and opens/closes properly.
- Replace ant damaged clips.