Engine Controls - MIL ON/DTC P0017 Set

GROUP
Engine

NUMBER
087

MODEL
2011 Sorento (XM)
w/3.5L

DATE
December 2010

SUBJECT:
TSB: PCM UPGRADE - MIL ON WITH DTC P0017 DTC LOGIC
IMPROVEMENT

This bulletin provides the procedure to upgrade the Powertrain Control Module (PCM) of some 2011 Model Year Sorento (XM) vehicles equipped with 3.5L engine prior to September 20 2010 Some vehicles may experience a Malfunction Indicator Lamp (MIL) illuminated with system-related DTC P0017 stored in the PCM

^ P0017: Crankshaft Position - Camshaft Position Correlation (Bank 1 Sensor B)





For confirmation that the latest reflash has been performed to a vehicle you are working on verify ROM ID using the tables in this TSB








To correct this condition, the PCM should be reprogrammed using the GDS download as described in this bulletin.








ROM ID INFORMATION TABLES:





1. Connect the power supply cable to the GDS tool





2. Connect the USB cable between the VCI and the GDS tool

3. Connect the Main 16-pin DLC cable (GHDM - 241000) to the VCI





4. Connect the Main 16-pin DLC cable (GHDM - 241000) to the OBD-II connector, located under the drivers side of the instrument panel.





5. With the ignition key ON turn ON the VCI and GDS tool. Access the GDS vehicle identification number (VIN) screen and configure the vehicle using the VIN AUTO DETECT Function.





6. Once back at the GDS Main Screen select ECU Upgrade from the bottom right-hand corner Next select Auto Mode and then Engine. Perform the PCM upgrade in accordance with normal GDS tool PCM upgrade procedures





MANUAL MODE PCM UPGRADE PASSWORDS:

7. When the GDS tool reports that the PCM upgrade has been successfully completed click OK turn OFF the ignition key and wait at least 10 seconds before attempting to start the engine.

8. Check for Diagnostic Trouble Codes using the GDS and erase any DTCs stored such as EPS ESC and TPMS Due to CAN BUS multiple DTCs may be set during reprogramming.

9. Start the engine to confirm proper operation of the vehicle.





AFFECTED PRODUCTION RANGE:





SERVICE ACTION WARRANTY CLAIM INFORMATION: