Component Inspection

Rear Area Module
B1627 EEPROM Corruption - Inspection/Repair:_:Component Inspection

Component Inspection

1. Connect scantool to Data Link Connector(DLC).
2. Ignition "ON" & engine "OFF"
3. Erase the DTC.
4. Is the DTC erased ?
YES
1) Check connecing condition of connector and go to "Verification of Vehicle Repair".
NO
1) Replacing the RAM with 'RAM for test', if normal operating condition is confirmed, Replace 'RAM for test' with 'new RAM' and go to "Verification of Vehicle Repair".