Component Inspection

Power Tail Gate
B2425 Left Pinch Strip Open or Stuck High - Inspection/Repair:_:Component Inspection

Component Inspection

1. Check left APS
1. Ignition "ON" & engine "OFF"
2. Disconnect APS
3. Measure resistance between terminal 1 and 2 of APS.
A. Specification : Anti pinch "ON" -> 500Ohms, "OFF" -> 6.2kOhms±5%




4. Is the measured resistance within specifications?
YES
1) Check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage. Repair or replace as necessary and then go to "Verification of Vehicle Repair" procedure.
NO
1) Substitute with a known-good APS and check for proper operation.
If the problem is corrected, replace APS and then go to "Verification of Vehicle Repair" procedure.