Scantool Diagnostics

Tire Pressure Monitoring System
C1318 Sensor 2 Wrong Type Installed - Scantool Diagnostics

Monitor GDS Data

1. Place TPMS Exiter within 10 cm of the tire's sensor which will be measured.
2. Check a sensor's ID out of sensor's information.

Measuring method :Refer to No.1 Measurement




NO.1) A method of checking a sensor ID with TPMS Exciter TPMS Exiter within 10 cm of the tire's sensor which will be measured




Fig.1) Data displayed by TPMS ECU
3. Is parameter within specifications?