Scantool Diagnostics

ESC(MEB-2)
C2372 Electronic Shuttle Valve Primary (HSV1) Error - Scantool Diagnostics:_:Monitor Actuation Test

Monitor Actuation Test

1. Connect scantool to Data Link Connector(DLC)
2. Ignition "ON" & Engine "OFF".
3. Select the "Actuation Test" mode on the scantool.
4. Inspect opearating status of ESP(HSV) valve #1 with Actuation Test.

Specification :It's normal if operating sound is heard.




Fig.1) Test Condition : Ignition "ON" & Engine "OFF".
Ex) Actuation Test on ESP(HSV) valve #1
5. Does a ESP(HSV) valve #1 operate normally?