Scantool Diagnostics

Tire Pressure Monitoring System
C2511 Diagnostic(TPMS) Lamp Circuit Failure - Scantool Diagnostics

Monitor GDS Data

1. Park the vehicle on an even ground.
2. Connect GDS to Data Link Connector(DLC).
3. IG "ON"
4. Operate "TPMS Lamp" item of the Actuation Test by force.

Specification:The TPMS Diagnostic Lam blinks.




Fig.1) Displayed data when the "TPMS Diagnostic Lamp" blinks by force.
5. Is the service data shown normally?