System Inspection

Engine Control
P0018 Crankshaft Position-Camshaft Position Correlation (Bank 2 Sensor A) - Inspection/Repair:_:System Inspection

System Inspection

Visual Inspection
1. Check oil level is O.K.
2. Check Oil and OCV is contaminated.
3. Has a problem been found ?





Visually check CKPS and target wheel
1. IG "OFF".
2. Visually check CKPS is loosened or target wheel is deformed or damaged.
3. Is the above items normal ?





Check CAM PHASER with actuation test
1. Connect GDS and IG "ON"
2. Select "CAM PHASER INTAKE BANK 2" on the Actuation Test.
3. Select "Exhaust Oil Control Valve" on the Actuation Test.
4. Activates "Cam Phaser Exhaust Bank1" by pressing "START" button.
5. Activates "Exhaust Oil Control Valve" by pressing "START" button.
6. Repeat this procedure 4 or 5 times to ensure CAM PHASER and valve control solenoid reliability.








7. Has a problem been found ?