Scantool Diagnostics

Engine Control
P2106 Lime Home Mode - Force Limited Power - Scantool Diagnostics

Monitor GDS Data

1. Connect GDS to DLC(Data Link Connector)
2. IG "ON" & Monitor that any different DTC(Diagnostic Trouble Code) is existed.
(There will be at least one more DTC which causes this DTC P2106 to retrieve )
3. Repair the DTCs cause DTC P2106 first according to the designated trouble shooting guide.
(After repairing the DTCs cause DTC P2106 , don't forget to do "ETC Initialization" as follows.)
4. Is vehicle repaired?